Versamatic Elima-Matic E8KP6XKK9 – air-operated diaphragm pump 3/8 inch, PVDF
Is this the right pump for your application? Compare flow rate, pressure, connection and materials of all Versamatic pumps in the pump finder and check in advance whether the materials suit your fluid.
▶ Open pump finder▶ Check compatibility
The E8KP6XKK9 from the Versamatic Elima-Matic series is a self-priming, bolted air-operated double diaphragm pump with 3/8 inch (DN10) NPT ports (range 3/8 inch AODD pumps (E8)). It delivers up to 26 l/min at a maximum of 6.9 bar; the permissible fluid temperature is -18 to 121 °C. It is driven by compressed air only – no motor, no shaft seal and no electrical parts. The pump can run dry, can be deadheaded and its output is infinitely variable via the air pressure.
The wetted housing in PVDF is particularly suitable for aggressive acids, oxidisers and chemicals, also at elevated temperatures. The Santoprene® (TPE) diaphragm (Thermo-Matic) is an abrasion-resistant TPE diaphragm with long service life for acids, caustics and abrasive fluids.
⚠ Important: check chemical compatibility. Whether an air-operated diaphragm pump runs reliably over time depends on the wetted materials – for this pump: housing PVDF, diaphragm Santoprene® (TPE). Fluid, concentration and temperature have a major effect on compatibility. Check your fluid with our chemical compatibility tool or send us an enquiry – we will review your application and recommend the right material combination.
Typical applications
- Aggressive acids such as nitric, hydrochloric and hydrofluoric acid (check compatibility)
- Oxidisers and chlorine compounds
- Semiconductor, plating and etching
- Chemicals at elevated temperature
Performance curve E8KP6XKK9

Solid lines: air supply pressure, dashed: air consumption. Curve based on water at ambient temperature with flooded suction.
Technical data E8KP6XKK9
| Manufacturer / series |
Versamatic (Warren Rupp / IDEX) · Elima-Matic Bolted Plastic |
| Port size |
3/8" (DN10) |
| Suction / discharge connection |
3/8" NPT (US pipe thread, tapered) |
| Max. flow rate |
26 l/min |
| Max. discharge pressure |
6.9 bar |
| Max. air supply pressure |
6.9 bar (100 psi) |
| Displacement per stroke |
0.00 l |
| Air inlet |
1/4" NPT (US thread) |
| Fluid temperature range |
-18 … 121 °C |
| Limited by |
PVDF (housing) |
| Max. solids size |
2.54 mm |
| Max. sound pressure level |
78 dB(A) |
| Wetted housing |
PVDF (Kynar®) |
| Centre section (non-wetted) |
polypropylene (PP) |
| Diaphragm |
Santoprene® XL (TPE) – Thermo-Matic |
| Valve balls / seats |
/ |
| Dimensions H × W × D |
135 × 127 × 144 mm |
| Weight |
2.0 kg |
Spare parts, downloads and advice
Matching spare parts and repair kits can be found directly in the exploded view; the data sheet with performance curve and dimensional drawing plus the service manual are under Downloads. For advice on material selection or your application, please send us an e-mail enquiry stating fluid, concentration, temperature, flow rate and pressure.
More pumps: All air-operated diaphragm pumps · Versamatic Elima-Matic series · All pumps 3/8 inch (DN10) · Pumps with PVDF housing · Pumps with Santoprene® diaphragm · Pump finder · Repair kits
| Item information |
Value |
| Housing material (wetted): |
PVDF |
| Diaphragm Material: |
Santoprene® - TPE |
| Maximum delivery pressure: |
6,9 bar |
| Maximum operating temperature: |
82 °C |
| Minimum operating temperature: |
0 °C |
| Suction lift (wet): |
6,7 Meter |
| Housing design: |
Bolted |
| Housing material (non-wetted): |
Polypropylene |
| Air connection output: |
1/4 Inch |
| Air connection input: |
1/4 Inch |
| Manufacturer series: |
Versamatic Elima-Matic |
| Max. pressure (bar): |
6,9 |
| Flow rate (l/min): |
0–20 l/min |
| Port size (inch): |
(DN 10) 3/8" |
| Wetted housing: |
PVDF |
| Suction lift (dry): |
2,4 metres |
| Connection size: |
3/8 Inch |
| Port size (pressure side): |
3/8 Inch |
| Port size (suction side): |
3/8 Inch |
| Explosion protection (ATEX): |
Without Explosion protection (ATEX) |
| FDA compliant: |
Without FDA compliance |
| Displacement per Stroke: |
0,017 litres |
| Model: |
Elima-Matic |
| Connection Type: |
NPT |
| Check valve material: |
PVDF |
| Seats material: |
PVDF |
| Maximum solids size: |
2,5 mm |
| Flow rate: |
26 Litres per minute |
| Flow rate: |
15 - 26 Litres per minute |
| Connection standard: |
NPT (US pipe thread) |
| Air inlet (inch): |
1/4" |
| Non-wetted housing: |
Polypropylene |
| Diaphragm: |
Santoprene (TPE) |
| Diaphragm type: |
Thermo-Matic |
| Check valve: |
PVDF |
| Valve seat: |
PVDF |
| Max. temperature (°C): |
up to 40 °Cup to 60 °Cup to 80 °C |
| Min. temperature (°C): |
0 |
| Max. solids size (mm): |
up to 1 mm |
| Dry suction lift (m): |
from 2 m |
| Wet suction lift (m): |
6,7 |
| Displacement per stroke (l): |
0,017 |
| Housing design: |
bolted |
| ATEX: |
no |
| FDA compliant: |
no |
| Shipping weight: |
2,00 kg
|
| Item weight: |
2,00 kg
|
| Dimensions
( Length × Width × Height ):
|
10,40 × 14,40 × 13,50 cm |
Product safety information
Manufacturer information:
Versamatic
, ,
Explosionszeichnung E8KP6XKK9 – Positionen anklicken
Maus über eine Position zeigt Teil und Menge, Klick öffnet das Ersatzteil.EinzelteilKit E8 AIR KITKit E8K XL KITlaut Manual / ersetzt
Reparatursätze (Kits) für diese Pumpe
Ersatzteilliste
| Pos. |
Teilenr. |
Bezeichnung |
Menge je Pumpe |
Kit |
Hinweis |
| 1 |
10-048 |
VENTILKÖRPER |
1 |
|
|
| 2 |
E500B ASY |
SPULENEINHEIT, 1/2" LUFTVENTIL |
1 |
|
|
| 3 |
P98-104A |
Valve Spool U-Cup |
2 |
E8 AIR KIT |
im Kit E8 AIR KIT enthalten |
| 4 |
E800D ASY |
ENDDeckelN-ASSY |
2 |
E8 AIR KIT |
|
| 5 |
E500E |
End Cap O-Ring |
2 |
|
laut Service-Manual, nicht in der aktuellen Stückliste dieser Pumpe |
| 8 |
10-075 |
LUFTUMLENKER, E8 |
1 |
E8 AIR KIT |
|
| 9 |
E500H |
E5 KERAMIKPLATTE |
1 |
E8 AIR KIT |
|
| 10 |
E800J |
DICHTUNG, LUFTVENTIL, BUNA |
1 |
E8 AIR KIT |
|
| 11 |
10-050 |
SCHRAUBE, 12 x 3/4 SCHRAUBE mit Schlitz |
4 |
|
|
| 12 |
E801A |
B10 MITTELTEIL |
1 |
|
|
| 18 |
E803A |
VORSTEUERKOLBENKOLBENSTANGE, B10 |
1 |
|
|
| 19 |
E503C |
E5 ABSTANDHALTER FÜR VORSTEUERKOLBENKOLBENSTANGE |
5 |
|
|
| 20 |
E503B |
O-RING, VORSTEUERKOLBENKOLBENSTANGE, BUNA |
8 |
E8 AIR KIT |
|
| 21 |
E503D |
SICHERUNGSRING EXT SST. 3/8 |
2 |
|
|
| 22 |
E801B |
KOLBENKOLBENSTANGENSICHERUNG |
2 |
|
|
| 25 |
E501C |
PHIL PAN TEK 410SS 6 X 1/2 |
4 |
|
|
| 33 |
06-034 |
Muffler |
1 |
|
laut Service-Manual, nicht in der aktuellen Stückliste dieser Pumpe |
| 34 |
E503B |
Main Shaft O-Ring |
2 |
E8 AIR KIT |
im Kit E8 AIR KIT enthalten |
| 35 |
10-028 |
KOLBENKOLBENSTANGE, E8 HAUPT, Edelstahl |
1 |
|
|
| 37 |
C126 |
MEMBRANETELLER Innen |
2 |
|
|
| 38 |
10-040 |
AUSSENPLATTE, PVDF |
2 |
|
|
| 40 |
10-032 |
MEMBRAN, SANTOPREN |
2 |
E8K XL KIT |
|
| 44 |
10-036 |
PUMPENKAMMER, AUSSEN, B10 KYNAR |
2 |
|
|
| 45 |
10-052 |
SCHRAUBE, 12 x 1 3/4 SCHRAUBE mit Schlitz |
4 |
|
|
| 46 |
10-051 |
SCHRAUBE, 12 x 1 1/2 SCHRAUBE mit Schlitz |
12 |
|
|
| 50 |
10-039 |
Ventil Sitz PVDF |
4 |
E8K XL KIT |
|
| 51 |
10-073 |
VENTILSITZDICHTUNG - SANTOPREN |
8 |
E8K XL KIT |
|
| 52 |
10-038 |
SCHAFT, FKM-VENTIL |
4 |
E8K XL KIT |
|
| 53 |
10-030 |
Feder, VENTIL |
4 |
E8K XL KIT |
|
| 60 |
10-037 |
VERTEILERROHR, 3/8 ZOLL, PVDF |
2 |
|
|
|
10-047 |
Gewindestütze Verteiler, E8 10-047 |
2 |
|
|
Positionen gemäß Versamatic Service-Manual (Composite Repair Parts Drawing), Stückliste 1:1 laut Versamatic für diese Pumpennummer. Graue Zeilen: Positionen aus dem Manual, die in der aktuellen Stückliste anders geführt werden. Teile ohne Pos.-Nr. sind Unterteile/Zubehör. Ersatzteil nicht gefunden? Schreiben Sie uns.